Swirls, scratches and dull paint hide the colour you paid for. Garside's Detailing Works corrects damaged clear coat with measured machine polishing, careful compound choice and a finish made for your car.
Before
Corrected
Swirl marks are fine scratches caused by poor washing. Holograms are machine trails left by rushed polishing. A deeper scratch may cut through the clear coat and needs an honest assessment.
We measure paint thickness before work begins. Then we use a test spot to find the safest pad and compound combination. Only a microscopic layer is removed.
Single-stage work improves gloss and light defects. Multi-stage correction targets heavier defects panel by panel.
No guesswork. Every vehicle gets a test area before the full correction stage begins.
Traffic film, iron deposits and bonded grit are removed before inspection.
LED lighting and a paint depth gauge reveal defects and safe working limits.
A small test spot sets the right pad, polish and number of passes.
Machine polishing removes swirls, haze and holograms in controlled stages.
Panel wipe removes polishing oils, followed by a final light check.
Drag each comparison. The finish tells you more than a promise.
Your assessment confirms the right package. Deep scratches are discussed before any machine touches the paint.
A sharper gloss for newer cars and minor wash marks.
Our choice for moderate swirls, haze and holograms on dark cars.
For heavy oxidation, stubborn defects and high-value paintwork needing patient correction.
Specific paint problems. Clear outcomes.
The black Porsche had years of circular marks. The corrected bonnet now reflects the lights cleanly, and the colour looks deeper in daylight.Segun T. · Verified customer
We booked an end-of-lease enhancement after the inspection showed light wash damage across the doors. The work was explained clearly, the timing was agreed in advance, and the Audi looked presentable when it went back to the leasing company.Thomaz Dunwoodie, Fleet coordinator at South London Trade Cars
Why did I choose Garside's Detailing Works? Because the team measured the paint on my classic Jaguar, showed me the test spot and stopped short of promising miracles. The finish is clearer and the original paint has been treated with care.Payman C. · Verified customer
Good work starts with realistic expectations.
Some scratches sit within the clear coat and can be reduced or removed. If a mark catches a fingernail or reaches the colour layer, we explain the safe limit and discuss touch-in or bodyshop work.
A one-stage enhancement commonly takes a full working day. Two-stage and multi-stage correction can take longer, depending on vehicle size, paint hardness and the number of panels affected.
Yes, when the process is measured. We record paint depth, use a controlled test spot and tailor the machine speed, pad and compound to the clear coat.
Usually. Hologram correction uses a refining stage that removes machine trails and restores a cleaner reflection, especially on black and other dark colours.
Send a few details about the vehicle and its paint defects. We will arrange an initial inspection and prepare a clear quote.